DIVD Corporation

Computers

DIVD will provide the proper specifications for any computer included in a solution. DIVD very strongly believes in including a hardware watchdog in order to minimize support and functionality matters. Our most popular (and economic) computer has the following specifications:

Case Dimensions: 9cm x 20.5cm x 23cm
Motherboard Form Factor: Mini-ITX 170 mm x 170 mm
Chipset: VIA CN700 and VT8237R Plus
CPU: VIA C7/EDEN 1.5Ghz (performance similar to Pentium 3Ghz) with V4 bus in NanoBGA2 package
Memory: One 184-pins DIMM socket for DDR266/333/400 SDRAM, up to 1 GB
Video: CN700 Integrated S3 Graphic Engine; Support CRT and LVDS LCD panel dual independent display
Audio: 3D AC97 Audio CODEC with Line-OUT, Microphone, LINE-IN, Center/LF and Surrounding
On Board I/O: 2 x IDE channels with PIO mode 4, Ultra DMA33/66/100 and Bus Mastering; 1 x 40-pins IDE connector for 3.5" HDD/CDROM; 1 x 44-pins connector for 2.5" HDD or Disk-on-Module; 1 x 50-pins CFII socket for Compact Flash Card; 2 x SATA Ports support SATA-I and SATA-II Device (up to 2 x SATA ports can be configured as RAID0, RAID1); 8 x USB 2.0 ports (4 Ports in box-header for internal connection and 4 ports on rear with Type-A connector); 6 x COM ports (COM1 on rear DB-9 connector and COM2 to 6 on 10-pins box-header; COM2 and COM4 are RS232/422/485 selectable; COM1 and COM2 ports can be powered with 5V, 12V or Ring-In, selectable by jumpers); 1 x SPP/ EPP/ECP bi-directional parallel port on rear; 1 x IrDA port
LAN Interface: Two RealTek RTL8110SC on board for dual 10/100/1000M Ethernet connection
Watchdog Timer: Programmable watchdog timer from 1-255 seconds
Power: Support both AT mode or ATX mode operation; 1 x ATX 20-pins power connector for system power
System Monitoring: PC Health Monitoring ASIC on-board monitors system power rails, FAN speed, CPU/system temp. CPU FAN and System FAN automatically turn on and off based on CPU and System temperature
Operating Temperature: 0 to 50 °C operating; relative humidity: 5-95%, non-condensing